Petroleum Equipment |

Petroleum Equipment

Our diverse range of Petroleum Equipment carters the need of fine and thorough testing of extracted petroleum products. We offer instruments that are precise, advanced and reliable. We supply vast range of Petroleum Equipment ranging from, but not limited to, Crude Oil Water Content Tester, Low Temperature Kinematic Viscometer, Open Cup Flash Point Tester, Water Separability Tester, Cleveland Open Cup Flash Point Tester, Vapor Pressure Tester (Reid Method), Coulometric Karl Fischer Titrator and Ash Content Tester (Seperately display).

Sub Categories

Viscometer Petroleum Equipment
Tester Petroleum Equipment
Meters Petroleum Equipment
Machine Petroleum Equipment

Download Catalog

Note: To download a single product catalog please goto the product page and download catalog

Viscometer Petroleum Equipment
Tester Petroleum Equipment
Meters Petroleum Equipment
Machine Petroleum Equipment

Working unit	4 tubes
Temperature controlling method	Imported PID digital temperature controller
Temperature controlling accuracy	± 0.1 ℃
Heating method	Electrical heating tube

Working units	2
Temperature controlling range	50 – 40 °C ± 0. 1 °C
Refrigerated by	Shock absorption air compressor,Fluorine free
Safety	Device can prevent over-low liquid level

Temperature range	- 5 °C – 40 °C ± 0.02 °C
Temperature control	Automatic nonlinear curve
Window operation system	XP, Win7
Optional accessory	Test components of ASTM D6896 and ASTM D6821

Test units	5
Test samples	10 - 20 every hour
Calibration error of standard oil	Automatically calculated
Working Conditions	24 hours continuous working for 365 days

Lifting method	One-click, Automatic
Operation method	Touch screen
Cooling	Peltier cooling can test after 2 hours constant temperature

Capillary viscometer tubes (Pinkevitch viscometer)	6 pieces in total and the diameters for each is 0.6, 0.8, 1.0, 1.2, 1.5, 2.0 mm.
Temperature range	- 65 ℃～room temp
Temperature control accuracy	± 0.1 ℃
Ambient temperature	15 ℃～35 ℃

Water bath temperature control range	Ambient to 80 ℃
Ambient temperature	15 ℃ ~ 35 ℃
Relative humidity	≤ 85 ％
Maximum power consumption	700 W

Sample	12
Test temperature(°C)	-5,-10 -15,-20,-25,-30,-35
Temperature controlling range	Can reach to ±0.02°C
Viscosity measuring range	1500-25000cp

Lifting method	One-click, Automatic
Viscosity and Gelation curve	Automatic scan
Gelation index and Temperature analysis	Automatic
Temperature	Multi-point calibration

Timing method	Automatic stroke timer
Temperature control range	30 – 35 °C
Rotation speed	925 ± 25 r/min
Power	1100 W

Mode	Fully automatic
Structure	Adopt split
Record test result	100 groups
Refrigeration method	Automatic forced air cooling

Air cooling	Automatic when temperature is too high
Stop	Automatic if there isn't operation after heating 20 minutes
Heating	Can only be started if press switch 3 seconds,avoiding touch by mistake.
Safety	Use heat resistant glass interlayer on the heater,avoid oil splash and fire breaking out

Heating	Dry heating,avoiding toxicity produced by traditional wood's metal heat conduction
Temperature sensor	Measures oil temperature in crucible directly
Air cooling	Makes the next test faster
Pressure gauge	Red oil differential pressure gauge with level meter inside

Lifting system	Automatic
Opening lid and Ignition	Automatic
Flame size	Adjustable
Air cooling	Automatic forced air cooling after test.

Working units	4
Stirrer	Independent quiet, controls rotating speed, test time and automatically stop
Liquid circulator	Sputtering multi-channel
Mixing blade	Sliding automatic

Working units	1 – 4
Temperature	Upto 400 °C
Metal bath heating	Eco-friendly,high effect of heat insulation
Test bomb	Standard stainless steel with inlet valve of 20m1

Accuracy	Upto 0.01 s
Samples size	2, simultaneously
Tube	Press-on joint make it easy to dismantle
Blowing time and Defoaming time control	Automatic

Samples size	6, simultaneously
Test samples	Lubricating oil and grease with different cylinders
Safety	Safety protection device an prevent over-high liquid level
Metal bath	Eco-friendly heating,no need heat-conducting medium

Working units	9
Stirrer	Digital, rotating, adjustable speed
Stirring time and record separation time	Automatically controlled
Unit of separation time	Selective

Working units	2
Test sample	Antifreeze
Temperature control range	Ambient to 20 °C ± 0. 1 °C
Refrigeration	Shock absorption compressor, fluorine free

Samples size	4 groups sample expandable to 8 groups
Sample bottle	Automatic 360° turn
Air cooling system	Starts heat radiation automatically when temperature of instrument surface is too high
Enamel tank	High quality, corrosion resistant, easy to clean with fan circulation and lighting.

Units	Main unit and gas source controller
Flow meter	Electronic, controls flow at 94 ± 5 ml/min (optional)
Air filter	With molecular sieve
Bath	Refrigerated, 360° circulating, complete transparent.

Samples size	8 groups sample simultaneously
Air cooling system	Starts heat radiation automatically when temperature of instrument surface is too high
Tank	High quality enamel tank, corrosion resistant and easy to clean
Fan	With fan circulation and lighting inside.

Probe	Silver probe or NiCr probe
Probe	Released and lifted automatically
Cooling speed	300 °C
Test medium	Oil, Water, Quench liquid, Saline-alkaline solution, Steel rolling coolant, Cutting fluid.

Samples size	2 sample simultaneously
Calculate	Adverage value
Temperature	- 70 °C
Refrigerant	Dual air compressors

Trough	Two, temperature controlled separately
Samples size	2 samples in each trough
Tempearture Range	Reach -30°C in 30 minutes and the lowest temperature is -70°C ,
Refrigeration	Dry type over speed refrigeration technology without medium

Furnace	IR heating furnace no radiation, fast temperature rising speed
Test requirements	Comply with test requirements of antifreeze and brake fluid
Glass partition	High temperature resistant
Display	Control voltage

Tests	Static and Dynamic
Motor	Automatic stop when test is finished
Operation	Observe bearing through reflector with zoom function
Time	Can edit working time and stop time

Working units	3, can be extended to 4-6 units
Circulator	Sputtering multi-channel liquid circulator can guarantee temperature uniformity
Condenser	Quick detachable device
Safety protection device	Can prevent over-low liquid level

Petroleum Equipment

PTL11-04

Kinematic Viscometer

PTL12-02

Low Temperature Kinematic Viscometer

PTL13-05

Mini Rotary Viscometer

PTL14-05

High Temperature High Shear Viscometer

PTL15-01-A

Low Temperature Brookfield Viscometer

PTL16-01-E

Engler Viscometer

PTL17-06

Low Temperature Kinematic Viscometer

PTL18-80

Automatic Capillary Viscometer Washer

PTL19-15-A

CCS Machine (Automatic sampling)

PTL19-15-M

CCS Machine (Manual sampling)

PTL21-A

Low Temperature Pumpability & Gelation Index Tester

PTL22-A

Shear Stability Tester

PTL23-A

Open Cup Flash Point Tester

PTL25-A

Flash Point and Fire Point Tester

PTL26-A

Evaporation Loss Tester

PTL27-A

Closed Cup Flash Point Tester

PTL28-A

Rust Prevention Tester

PTL29-A

Thermal Stability Tester

PTL2A-01

Air Release Properties Tester

PTL2B-06

Copper Strip Corrosion Tester

PTL2C-09

Water Separability Tester

PTL2D-02

Density Tester

PTL2E-04

Hydrolytic Stability Tester

PTL2F-02

Foaming Characteristics Tester

PTL2G-08

Thermal Stabiliy Tester

PTL2H-02

High Temperature Foaming Characteristics Tester

PTL2I-30

Cooling Performance Tester

PTL2J-02

Foaming Tendency Tester

PTL2K-02

Freezing Point Tester

PTL2L-02

Pour Point Tester

PTL2M-02

Boiling Point Tester

PTL2N-A

Corrosion-Preventive Properties Tester

PTL2O-03

Corrosion Tester

PTL2P-60

Water Washout Resistance Tester

PTL2Q-75

Low-Temperature Torque Tester

PTL2R-04

Oxidation Stability Tester

PTL2R-A

Oxidation Stability Tester

PTL2U-04

Automatic Distillation Tester

PTL2V-06

Cleveland Open Cup Flash Point Tester

PTL2V-40

Motor	fixed speed 600 rpm
Temperature	Control test temperature at 38 °C and 79 °C as per ASTM standard
Independent start	Test shaft and Start water pump circulating system
Shaft	Upgraded connecting shaft can quickly install and dismantle bearing and inside and outside baffle

Cooling capacity	Can reach to -75 °C
Motor	Fixed speed
Refrigerant	Tecumseh compressor
Time	Automatically controlled

Samples size	4 sample simultaneously
Flow control system	Independent system, can automatically control flow of every sample.
Curve of conductivity and Induced knee point	Automatically recorded
Test curve	Can re-evaluate every test curve

Oxygen	Automatically fill in or discharge oxygen and detect leakage
Oxygen bombs	Two independent, can work separately
Pressure-time curve and turning point	Automatic draw and determine
Safety protection devices	Over-temperature protection device, automatic power off when temperature exceeds set value

Controlling system	SCM controlling system can automatically complete raising temperature, cooling, tempeature recording,printing etc
Liquid level tracking	High accuracy by laser tracking system
Flow speed of sample	Controlled within 4 – 5ml every minute from initial boiling point to 95%
Heating of distillation furnace	Automatically controlled

Igniting device: Ignition source	Coal gas (or civil gas)
Igniting device: Nozzle aperture	About 0.8 mm
Thermometer	(-6～400) ℃. Scale is 2 ℃
Ambient temperature	(15∼35) ℃

Igniting device: Ignition source	Coal gas (or civil gas)
Igniting device: Flame diameter	3.2 mm～4.8 mm
Temperature range	0 ℃～400 ℃
Display accuracy	0.1 ℃

Mode	Electric ignition
Ignition mode: Diameter of igniter	0.7 mm～0.8 mm
Heating rate: Initial heating	14～17 ℃/min
Heating_rate	It is (5-6)℃/ min after reaching the preset flash point 20℃

Mode	Electric ignition
Ignition mode: Gas flame diameter	3.2 mm～4.8 mm
Flash point determination: Range	Ambient to 400℃
Repeatability	≤ 8℃ (Flash Point)

Heating rate: Procedure A	(5～6) ℃/min
Heating rate: Procedure B	(1～1.5) ℃/min
Heating rate: Procedure C	(3.0±0.5) ℃/min
Stirring rate：Procedure A and C	(90～120) rpm