PMCC Flash Point Tester PTL2X-70
Petroleum testing is the analysis during upstream, midstream, and downstream production processes of petroleum products. It is most commonly used to test petroleum product, its product components, byproducts of crude oil, fuel, natural gas, upstream oil and gas and other formats of petroleum.
Used in Petroleum Industry, PVC Pipe Industry
- Single chip microcomputer control technique.LCD screen displays. The heating power is continuously step-less adjustable. The rate of heating up is exact.Easy setting for parameters. Press the “record”button when the flash point appears. The screen will show and reserve the flash point.
Features
- Single chip microcomputer control technique.LCD screen displays. The heating power is continuously step-less adjustable. The rate of heating up is exact.Easy setting for parameters. Press the “record”button when the flash point appears. The screen will show and reserve the flash point.
Specifications
| Heating device | (1) The furnace is silicon carbide material. Power is 600W. (2) The heating power is adjustable from 0 W to 600W |
| Heating_rate | Procedure A: (5～6)℃/min, Procedure B: (1～1.5)℃/min |
| Stirring device | (1)Stirring motor: BYGH101 stepping motor. (2) Driving mode: flexible shaft. (3) Shaft size: 8mm×40mm |
| Stirring rate | Procedure A: (90～120) rpm, Procedure B: (250±10) rpm |
| Stand oil cup: | |
| Internal diameter | 50.7mm～50.8mm |
| Depth | 55.7mm～56.0mm |
| Marking depth of oil testing capacity | 33.9mm～34.3mm |
| Oil test capacity | About 70ml |
| Igniting device: | |
| Igniting source | Gas（or other civilian fuels） |
| Ambient temperature | （15～35）℃ |
| Relative humidity | ≤ 85% |
| Power supply | AC（220±10%）V, 50Hz |
| Total power consumption | ≦650W |
| Dimension | 340×330×380 mm |
| Net weight | 9 kg |