PMCC Flash Point Tester PTL2X-50
Petroleum testing is the analysis during upstream, midstream, and downstream production processes of petroleum products. It is most commonly used to test petroleum product, its product components, byproducts of crude oil, fuel, natural gas, upstream oil and gas and other formats of petroleum.
Used in Petroleum Industry, PVC Pipe Industry
- The heating power is continuously adjustable. The power is shown visually by voltmeter. The temperature control mode is advanced and reasonable. The structure is designed small and exquisite. The stainless-steel table board is beautiful and easy to clean. Operation is easy. Test results are precise. It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes.
Features
- The heating power is continuously adjustable. The power is shown visually by voltmeter. The temperature control mode is advanced and reasonable. The structure is designed small and exquisite. The stainless-steel table board is beautiful and easy to clean. Operation is easy. Test results are precise. It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes.
Specifications
| Oil cup: | |
| Inner diameter | 50.7 mm～50.8 mm |
| Depth | 55.7 mm～56.0 mm |
| The scribed line depth of capacity of testing oil | 33.9mm～34.3mm |
| Capacity of testing oil | About 70ml |
| Igniting source | Gas（or other civilian fuels) |
| Stir mode | Mechanical drive stirring |
| Stirring rate： Procedure A | (90～120) rpm |
| Stirring rate： Procedure B | (250±10) rpm |
| Heating device | (1)The furnace body is made of silicon carbide. (2)Heating power is adjustable from (0-600)W |
| Heating mode | Adjust by manual |
| Thermometers：Mercury-in-glass thermometer | Scale 90℃～370℃,division 2℃ |
| Ambient temperature | （15～35）℃ |
| Relative humidity | ≤ 85％ |
| Power supply | AC (220±10%)V, 50Hz |
| Total power consumption | ≤ 650W |
| Dimension | 370×320×300 mm |
| Net weight | 7 kg |