Multi-parameter Analyzer MET61-008
Multi-parameter Analyzer simultaneously measures Ion, Conductivity, Dissolved Oxygen, Temperature that otherwise requires four different meters. With the appropriate probes installed, it can also simultaneously measure several or one parameters.
Features
Specifications
| pH: | |
| Range | -2.000 to 20.000 pH |
| Resolution | 0.1, 0.01, 0.001 pH |
| Accuracy | ± 0.002 pH |
| Calibration Points | Up to 8 |
| Standard Customization | Yes |
| Calibration Reminder | Yes |
| Standard Recognition | USA, NIST, MERK, JIS, GB and DIN buffers |
| Slope Limit | Yes |
| mV/ORP: | |
| Range | - 2000.00 to 2000.00 mV |
| Resolution | 0.1, 0.01 mV |
| Accuracy | ±0.1 mV or ±0.03 % of reading whichever is greater |
| EH ORP Mode | Yes |
| ORP Calibration Points | 1 custom point (relative mV) |
| pX: | |
| Range | - 2.000 to 20.000 pX |
| Resolution | 0.1, 0.01, 0.001 pX |
| Accuracy | ± 0.002 pX |
| Calibration Points | Up to 6 |
| ISE: | |
| Range | 1E-9 to 9.999E9 |
| Unit | mol/L, mmol/L, g/L, mg/L, μg/L |
| Resolution | Up to 4 significant digits |
| Accuracy | ± 0.3 % |
| Calibration Points | Up to 8 |
| Conductivity: | |
| Range | 0.000 μS/cm to 3000 mS/cm |
| Resolution | 1.001 μS/cm minimum; changed with range |
| Accuracy | ± 0.5 % FS |
| Reference Temperature | 5, 10, 15, 18, 20, 25 °C |
| Calibration Points | Up to 5 |
| Calibration Reminder | Yes |
| Standard Recognition | 10 μS/cm, 84 μS/cm, 500 μS/cm, 1413 μS/cm; 12.88 mS/cm |
| Resistivity: | |
| Range | 5.00 Ωcm ~100.00 MΩcm |
| Resolution | 0.01 Ωcm minimum |
| Accuracy | ± 0.5 % FS |
| TDS: | |
| Range | 0.000 mg/L ~1000 g/L |
| Resolution | 0.001 mg/L minimum; changed with range |
| Accuracy | ± 0.5 % |
| Salinity: | |
| Range | (0.00 ~8.00) % |
| Resolution | 0.01 % |
| Accuracy | ± 0.1 % |
| Dissolved Oxygen Concentration: | |
| Sensor Type | Polarographic |
| Range | 0.00 to 99.99 mg/L |
| Resolution | 2.01 mg/L |
| Accuracy | ± 0.3 mg/L (0.00 to 20.00 mg/L) ± 10% (20.00 to 99.99 mg/L) |
| Calibration Reminder | Yes |
| Calibration Points | Air-saturated water or zero point |
| Barometric Compensation | Yes |
| Manual Salinity Factor Correction | Yes |
| Saturation: | |
| Range | (0.0 to 600.0)% |
| Resolution | 0.10 % |
| Accuracy | ± 10.0 % |
| Temperature: | |
| Range | - 10 to 135 °C, 14 to 275 °F |
| Unit | °C, °F |
| Resolution | 0.1 |
| Relative Accuracy | ± 0.2 |
| Measurement: | |
| Reading Mode | AutoRead( Fast, Medium, Slow), Timed, Continuous |
| Reading Prompts | Reading, Stable, Locked |
| Data Management: | |
| Data Storage | 1000 Groups |
| GLP Features | Yes |
| Inputs: | |
| pH Electrode | BNC(Q9) |
| Temp./DO Probe | 4-pin aviation connector |
| Temp.//EC. Probe | 5-pin aviation connector |
| Outputs: | |
| USB | USB 2.0 flash memory device, PC,scanner |
| Bluetooth | printer |
| Display Options: | |
| Backlight | Yes |
| Auto Shut-down | 300, 600, 1200, 1800, 3600sec, off |
| IP Rating | IP65 |
| General: | |
| Power | AC Adapter, 100-240 V AC input, DC 5 V output |
| Dimensions | 90x255x40 mm |
| Weight | 500 g(1.1 lb) |