Home /
Water Purification System
/ Ultrapure Water Purification System
/ Eliminating endotoxin Ultrapure Water System WPS61-002UF
Eliminating endotoxin Ultrapure Water System WPS61-002UF
Ultrapure water system is sub-economic choice for high grade experiments. This level of purification is required for advanced analytical techniques, such as HPLC, and is commonly used for semi-conductor manufacturing.
Used in Laboratory, Manufacturing, Reefkeeping, Aquarium, Laboratory, Research
Also known as Laboratory Ultrapure water system
- Human engineering design, high-strength, streamline plastic shell.
- One time injection molding process case, material: Polypropylene PP.
- Elegant and compact case, integrating pre-filter, RO, DI, UV, UF and terminal filter into one.
- All filters are built-in, for the smallest outside space.
Features
- Human engineering design, high-strength, streamline plastic shell.
- One time injection molding process case, material: Polypropylene PP.
- Elegant and compact case, integrating pre-filter, RO, DI, UV, UF and terminal filter into one.
- All filters are built-in, for the smallest outside space.
- Top cap of pre-filters in the case can be rapidly opened to replace the pre-filters without opening the case.
- With electronic pressure sensor and microcomputer controlling, the system automatically produces pure water.
- Automatic stop without water, automatic stop when water tank full, automatically cutting off water when pump stopping,
- guaranteeing 24 hours’ work.
- Self-flushing of the reverse osmosis membrane, extend the life of RO membrane.
- On-line resistivity monitor, with apheliotropic LCD display, to detect the quality of deionized or ultrapure water.
- Attached portable TDS (total dissolved solid)/conductivity test pen, with dry cell design, to detect the quality of tap water
- and RO water.
- Different external tanks (optional) to meet every need and assure ample water-supply.
- Pretreatment cartridges, RO module, ultrapure cartridges, all designed to modularization independently. Easy to
- maintenance and replacement.
- Pipeline and fast-plug adaptor with NSF authorization, assure high quality ultrapure water.
- DOW’s RO membrane, ensure stable operation and high desalinization rate.
- 4 ultrapure cartridges, with DOW’s nuclear-grade polishing resin, ensure ultrapure water’s quality up to 18.2 MΩ.cm,
- with the lowest TOC dissolution.
- Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria’s increase and reduce TOC.
- MWCO 5000D ultrafiltration module, effectively eliminate endotoxin precise cell cultivating and IVF.
- (0.45+0.1)μm double layer PES terminal disinfection filter, assure the quality absolutely axenic.
Specifications
| Feed Water Requirements*: | |
| Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0Kgf/cm² |
| Flow Procedure** | PF+AC+RO+DI+UF+TF |
| Ion rejection rate | 96%-99% (New RO membrane) |
| Organic rejection rate | >99%,when MW>200 Dalton |
| Particles and bacteria rejection rate | >99% |
| Bacteria | <0.1 cfu/ml |
| Output(25°C)**** | 15 L/hrs |
| Pure water outlet | RO water and Ultrapure water |
| Water Quality Monitor | Portable TDS/conductivity test pen + on-line resistivity monitor |
| DimensionLxWxH | 410x220x420 mm |
| Weight | 20 kg |
| Standard configuration | Main body (Including 1 set of cartridges)+15 liters tank+ TDS pen +accessory bag |
| Power Consumption (W) | 48 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure water's quality and cartridges life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water's TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
| Deionized water quality: | |
| Particle(>0.2µm) | <1/ml |
| Ultrapure Water Quality: | |
| Resistivity(25°C) | 18.2 MΩ.cm |
| TOC*** | <10 ppb |
| Endotoxin | <0.001 EU/ml |
| Rnases | <0.01 ng/ml |
| Dnases | <4pg/µl |
| Heavy metal ion | <0.1 ppb |
| Flow rate | 2.0 L/min (with pressure tank) |