Electric OR table OPT11-2000B
Labstac’s electric operation table are cost effective, multi performance mobile operating table that meets the requirement of different surgeons. Easy-to-use electronic controls. Operation table equipped with a table top that rotates 180 degrees, and the chest plate, back plate, head plate, and leg plate on this table can all be easily adjusted, allowing for the ideal positioning of patients undergoing medical imaging tests.
Used in Medical unit, Surgery, Operation theatre, cardiovascular, pediatric, gynecology, abdominal, gall bladder, plastic surgery and more
Also known as Electric surgical table, Electric OR Table, Electric operating table
- Electro-hydraulic mode of operation is adopted. Two control modes (hand-held remote controller and panel) are available to control various movements. MCU processing is used
- Self-locking function is provided to avoid false triggering
- Quality stainless steel 304 is used for table support, base plate, column shield and rails on both sides of the table, easy for cleaning and sterilization. Console supports the use of cast aluminium parts, never rust
- The mattress is wrapped with imported artificial leather. High-density memory sponge is formed in one piece, with no seam
Features
- Electro-hydraulic mode of operation is adopted. Two control modes (hand-held remote controller and panel) are available to control various movements. MCU processing is used
- Self-locking function is provided to avoid false triggering
- Quality stainless steel 304 is used for table support, base plate, column shield and rails on both sides of the table, easy for cleaning and sterilization. Console supports the use of cast aluminium parts, never rust
- The mattress is wrapped with imported artificial leather. High-density memory sponge is formed in one piece, with no seam
- Quality carbon steel plate is used for the table top, which is convenient for X-ray photography
- AC and DC can use at the same time
- It has the function of auto-restoration
- The table top can sliding
- Electric braking device, convenient for shifting the operating table
- One press to “Λ” or “V”
Specifications
| Table Length | 2000±100 mm |
| Table Width | 520±20 mm |
| Height Adjustment | (700~1150) ±50 mm |
| Tilt (left)/Tilt (Right) | ≥15°/≥15° |
| Trendelenburg/Rev-Trend | ≥20°/≥20° |
| Head board upwards | ≥50° |
| Head board downwards | ≥90° |
| Backboard upwards | ≥70° |
| Backboard downwards | ≥40° |
| Waist board lifting | 100±20 mm |
| Leg board upwards | ≥15° |
| Leg board downwards | ≥90° |
| Leg board outwards | ≥180° |
| Lumbar upper corner “Λ” | ≤150° |
| Lumbar lower corner “v” | ≤110° |
| Horizontal and longitudinal movement | 400±30 mm |
| Standard Accessories | A Pair of Shoulder/Waist Support, A pair of Arm Support, A pair of leg Plate, A screen |
| Main Voltage AC | 220V±22V, 50Hz±1Hz |
| Input Power VA | 400±10% |