Dry Bath Incubator BAC12-100C
Compact design with stable operation, easy cleaning, replacement and disinfection of metal blocks. It is widely used for enzyme reactions, immunoassays, melting and boiling points, incubation and activation of cultures and variation of laboratory procedure. Flexible to accommodate a variety of interchangeable heating blocks.
Used in Pharmaceutical, Chemical, Food Safety, Environment, Quality inspection, Laboratory
Also known as Laboratory Dual Temperature Dry Bath Incubator
- Microprocessor controlled incubation temperature and time
- Compact design with stable operation
- Rapid heat up, uniform heating, high stability, low energy consumption and noise
- Simultaneous display of set temperature and time
Features
- Microprocessor controlled incubation temperature and time
- Compact design with stable operation
- Rapid heat up, uniform heating, high stability, low energy consumption and noise
- Simultaneous display of set temperature and time
- Built in temperature calibration function
- Aluminium blocks ensures even heat distribution, eliminating the possibility of heater burnout
- Custom blocks available to meet experimental requirements
- Easy cleaning, replacement and disinfection of metal blocks
- Automatic fault detection and buzzer alarm function
- Audio alarm indicates program completion
- Over temperature protection device
Specifications
| Temperature Range | -10-100 °C |
| Temp. Max. Decrease | R.T. decreases 30°C@R.T. 26°C |
| Temp. Setting Range | -10 °C ~100 °C |
| Temp. Stability@100°C | ±0.5 °C |
| Temp. Stability@40°C | ±0.3 °C |
| Block Temp. Uniformity | ±0.3°C |
| Temp. Display Accuracy | 0.1°C |
| Heating Speed | ≤15min (20°C to 100°C) |
| Cooling Speed | ≤30min (R.T. decreases 30°C) @R.T. 26°C |
| Time Range | 1 min ~ 99 h 59 min or continuous |
| Voltage | AC90~230 V, 50/60 Hz |
| Power | 150 W |
| Fuse | 250 V, 3A, φ5x20 |
| Dimension | W.196 x D.270 x H.170mm |
| Net Weight | 3.5 kgs |