CO2 Incubator Water Jacketed INC071-170
- Replace traditional button operation to touch screen interface
- It can display on time performance curve. You can check the temp., humidity and CO2 concentration three group curves changes at the same time. And abnormal alarm and door open or close message
- PT100 temp. sensor keeps inside chamber temperature accurate. It can adjust the heating power according to the temp. differences between actual temp. in the chamber and set temp. to make sure temp. in the chamber is accurate
- Water jacket heating method to ensure working chamber temperature is uniform, when it is power off, the chamber can maintain the temp. for a long time.
Features
- Replace traditional button operation to touch screen interface
- It can display on time performance curve. You can check the temp., humidity and CO2 concentration three group curves changes at the same time. And abnormal alarm and door open or close message
- PT100 temp. sensor keeps inside chamber temperature accurate. It can adjust the heating power according to the temp. differences between actual temp. in the chamber and set temp. to make sure temp. in the chamber is accurate
- Water jacket heating method to ensure working chamber temperature is uniform, when it is power off, the chamber can maintain the temp. for a long time.
- All data can be stored through RS485 port, if any failures, user can read the diagnostic message and data from computer at any time
- The ultraviolet lamp can sterilize the chamber regularly. It kills chamber recycle air bacteria and float bacteria from water tray or slop water in the bottom, effectively prevent pollution during cell culture period
- CO2 access port equips micro biological HEPA filter, it can filters diameter ≥0.3um Particles like CO2 gas bacteria and dust, the efficient reaches to 99.99%
- Cycle fan speed can be adjusted automatically. When chamber temp. is stable, the fan speed will be lower down, the speed will be adjusted to a suitable speed that the cell can growth
- Cycle fan avoids the fast fan speed that evaporating the samples
- CO2 inlet control system has pressure protection function, it prevents over pressure or low pressure to the pipes
- Chamber sensor failure alarm
- Door temp. sensor failure alarm
- CO2 condensation too high or too low alarm
- Independent temp. limiter alarm
- Door open too long alarm
- Disinfection and sterilization status reminder
Specifications
| Capacity | 170 L |
| Electrical requirement | AC 220 V / 50 Hz |
| Input Power | 700 W |
| Heating power | Water jacket |
| Temp. control range | RT+5 - 50°C |
| Work environment temp | +5 - 30°C |
| Temp. accuracy | ±0.1°C |
| CO2 control range | 0 - 20 % |
| CO2 control accuracy | ±0.1% (IR sensor) |
| CO2 restore time | (Door open 30s, recovery to 5%) ≤ 3min |
| Temp. restore time | (Door open 30s, recovery to 37°C) ≤ 8min |
| Related humidity | Nature vaporate > 95%(Can equip with related humidity digital display) |
| Chamber size | 530Wx460Dx720H mm |
| Overall size | 684Wx700Dx960H mm |
| Standard shelves quantity | 3 pcs |
| Sterilization | UV sterilization+HEPA sterilization |