Automatic Slide Stainer HTP41-30A
Staining is a process in which the tissue sample is exposed to colored dye which penetrates specific cell components to make the component of interest more visible under the microscope. Slide stainer stain prepared slides of processed tissue to enhance the contrast within a specimen for microscopic study. The operator to be heat the slides loads it into the solution reservoir and depending on requirement it is stained once or twice then rinsed and dried.
Used in Histology, Cytology, Hematology, Pathology, and Microbiology staining
Also known as Tissue dyeing, Slide Stainer
- The big Tissue Stainer can stain large quantity slides at same time. Adopt PLC control system and Electronic Touch Screen, it’s convenient to operation and low
- failure rate. Adopt high performance stepper motor and drive with Synchronous Belt, to ensure the balanced running, accurately fixed position, min. noise and so on.
- Adopt Photoelectric switch to fixed position, it has find position memory and reset automaticallyfunctions.
- It can store 10 different programs to meet the different staining requirements.
Features
- The big Tissue Stainer can stain large quantity slides at same time. Adopt PLC control system and Electronic Touch Screen, it’s convenient to operation and low
- failure rate. Adopt high performance stepper motor and drive with Synchronous Belt, to ensure the balanced running, accurately fixed position, min. noise and so on.
- Adopt Photoelectric switch to fixed position, it has find position memory and reset automaticallyfunctions.
- It can store 10 different programs to meet the different staining requirements.
- Battery backup can be optional, to permit staining of slides to continue during the main power failures.
Specifications
| Specimen slide throughput | At least 200 specimen slides per hour (depend on the selected program) |
| Loading capacity | 3 slides rack |
| Slide rack capacity | 30 specimen slides |
| Total number of stations | 26 |
| Number reagent stations | 18 |
| Reagent container volume | 600 ml |
| Number of wash stations | 3 |
| Number of wait stations | 3 |
| Oven | 1 |
| Oven chamber temperature | Ambient temperature to 85°C |
| Load/unload stations | 1 each |
| Incubation time setting | from 0 sec. up to 9999 sec. |
| Permanent memory capacity | 5 programs, up to 24 program steps each |
| Operation temperature range | 15 °C to 35 °C |
| Relative humidity | ≤ 90 % (+25°C) |
| Dimension ( W×D×H) | 120 cm × 50 cm × 60 cm |
| Weight | 110 kg |
| Voltage | 220 V, 50 Hz |
| Power rating | 300 VA |