+14135535210 contact@labstac.com Distributor Registration

Labstac

Analytical & Lab Equipment

WhatsApp
Chat Now
Get Pricelist

Live Chat

Go to All Products...

Home / Search

Conductivity of RO water quality : Search Results

Models

CEN46-140R

Refrigerated Microcentrifuge

  • Maximum Capacity (No of tubes x Vol.): 12x5 ml
  • Temp. Control Range: -10°C to 35°C
  • Temperature Accuracy: ± 1°C
  • Maximum Speed: 14000 rpm
CEN47-150R

Refrigerated Microcentrifuge

  • Maximum Capacity (No of tubes x Vol.): 12x5 ml
  • Temperature Range: -10°C to 35°C
  • Temperature Accuracy: ± 1°C
  • Maximum Speed: 15000 rpm
CEN48-150R

Refrigerated Microcentrifuge

  • Maximum Capacity (No of tubes x Vol.): 24x1.5/2 ml
  • Temperature Range: -10°C to 40°C
  • Maximum Speed: 500-15000
  • Maximum RCF: 21400xg
PTL2C-09

Water Separability Tester

  • Working units: 9
  • Stirrer: Digital, rotating, adjustable speed
  • Stirring time and record separation time: Automatically controlled
  • Unit of separation time: Selective
PTL2P-60

Water Washout Resistance Tester

  • Motor: fixed speed 600 rpm
  • Temperature: Control test temperature at 38 °C and 79 °C as per ASTM standard
  • Independent start: Test shaft and Start water pump circulating system
  • Shaft: Upgraded connecting shaft can quickly install and dismantle bearing and inside and outside baffle
PTL2Z-15

Water content Tester

  • Heating control: Can be continuously adjusted by a silicon knob, manual.
  • Ambient temperature: （15-35）℃
  • Relative humidity: ≤ 85%
  • Power supply: AC(220±10%)V，50Hz
PTL2Z27-10

Crude Oil Water Content Tester

  • Distillation flask: 1000 ml
  • Receiver: 5ml，graduation is 0.05 ml
  • Condenser: 400mm±5mm
  • Heater: heating mantle cap，500W×2，continuous adjustment
WPS21-063RO

Medium Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC
WPS21-094RO

Medium Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC
WPS21-125RO

Medium Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC
WPS22-020RRO

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+KDF+AC+RO+RO+AC
WPS51-015

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS51-015T

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS51-030

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS51-030T

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS51-045

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS51-045T

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS52-015

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS52-030

Basic RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS21-063DI

Deionized Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC+DI+TF
WPS21-094DI

Deionized Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC+DI+TF
WPS21-125DI

Deionized Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC+DI+TF
WPS22-020R

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+KDF+AC+RO+RO+DI+TF
WPS22-020RQ

Deionized Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+KDF+AC+RO+RO+AC+DI+TF
WPS22-020RUF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+KDF+AC+RO+RO+DI+UF+TF
WPS22-020RUV

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+KDF+AC+RO+RO+UV+DI+TF
WPS22-020RUVF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+KDF+AC+RO+RO+UV+DI+UF+TF
WPS53-045

Medium RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS53-063

Medium RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS53-094

Medium RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS53-125

Medium RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC
WPS54-250

Medium RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+AC
WPS62-045RO

Standard Medium Ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC+DI+TF
WPS62-045RO1

Standard Medium Ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC+DI+TF
WPS62-045RO2

Standard Medium Ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+AC+DI+TF
WPS21-063

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-063UF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-063UL

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-063UV

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-094

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-094UF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-094UV

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-094UVF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-125

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-125UF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-125UV

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS21-125UVF

Double stage RO ultrapure Water System

  • Feed Water Requirements*: Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
  • Feed Water Requirements*: Temperature: 5-45°C
  • Feed Water Requirements*: Pressure: 1.0-4.0 Kgf/cm²
  • Flow Procedure**: PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
WPS55-250

Large Capacity RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water or ground water
  • Flow Procedure**: QZ+AC+SI+MF+RO
  • Ion rejection rate: ≥98%
  • Output(25°C)****: 250 L/hr
WPS55-500

Large Capacity RO Water System

  • Feed Water Requirements*: Water Inlet: Tap water or ground water
  • Flow Procedure**: QZ+AC+SI+MF+RO
  • Ion rejection rate: ≥98%
  • Output(25°C)****: 500 L/hr
AIP11-0600

Dispensing Booth

  • Clean Level: ISO 5 (Class 100), Class A
  • HEPA Filters: 99.999% efficiency at 0.3pm
  • Air volume: Supply air volume: ≤7500m3/h, Exhaust air volume: ≤2250m3/h; Adjustable
  • Material: Fully stainless steel
AIP11-1000

Dispensing Booth

  • Clean Level: ISO 5 (Class 100), Class A
  • HEPA Filters: 99.999% efficiency at 0.3pm
  • Air volume: Supply air volume: ≤7500m3/h, Exhaust air volume: ≤2250m3/h; Adjustable
  • Material: Fully stainless steel
AIP11-1700

Dispensing Booth

  • Clean Level: ISO 5 (Class 100), Class A
  • HEPA Filters: 99.999% efficiency at 0.3pm
  • Air volume: Supply air volume: ≤7500m3/h, Exhaust air volume: ≤2250m3/h; Adjustable
  • Material: Fully stainless steel
AIP21-2000

Clean Booth

  • Clean Level: ISO 5(Class100),Class A
  • HEPA Filter: 99.999% efficiency at 0.3pm
  • FFU Nos.: 4 pcs
  • Control System: Microprocessor control system
AIP21-3000

Clean Booth

  • Clean Level: ISO 5(Class100),Class A
  • HEPA Filter: 99.999% efficiency at 0.3pm
  • FFU Nos.: 6 pcs
  • Control System: Microprocessor control system
AIP21-4000

Clean Booth

  • Clean Level: ISO 5(Class100),Class A
  • HEPA Filter: 99.999% efficiency at 0.3pm
  • FFU Nos.: 12 pcs
  • Control System: Microprocessor control system
AIP21-5000

Clean Booth

  • Clean Level: ISO 5(Class100),Class A
  • HEPA Filter: 99.999% efficiency at 0.3pm
  • FFU Nos.: 25 pcs
  • Control System: Microprocessor control system
AIP31-1000

Pathology Workstation

  • Work Surface Height: 850 mm
  • Exhaust Airflow Volume: 500~600m3/h
  • Main Body Material: 304 stainless steel
  • Work Table Material: 304 stainless steel
AIP31-1500

Pathology Workstation

  • Work Surface Height: 850 mm
  • Exhaust Airflow Volume: 500~600m3/h
  • Main Body Material: 304 stainless steel
  • Work Table Material: 304 stainless steel
AIP31-1800

Pathology Workstation

  • Work Surface Height: 850 mm
  • Exhaust Airflow Volume: 500~600m3/h
  • Main Body Material: 304 stainless steel
  • Work Table Material: 304 stainless steel
AIP41-900

Air Sterilizer

  • Filter: Primary Filter, HEPA filter
  • HEPA Filter: 99.99% efficiency at 0.3pm
  • UV Lamp: Germicidal UV lamp, Emission of 253.7 nanometers for most efficient decontamination
  • Optimal Space: ≤20m2
AIP51-900

PP Reagent Cabinet

  • Power Supply: AC110/220V士10%, 50/60Hz
  • Package Size (WxDxH）: 985x535x1915mm
  • Gross Weight: 72 kg
  • External Size (WxDxH): 900x450x1800 mm (can be customized according to customer needs)
AIP61-070

Ozone UV Sterilization Cabinet

  • Capacity: 70 L
  • Sterlization Method: Ozone
  • Shelves: 2pcs, optional 2pcs ,adjustable
  • Work zone Material: 304 stainless steel, 1.0mm thick
AIP61-090

Ozone UV Sterilization Cabinet

  • Capacity: 90 L
  • Sterlization Method: Ozone
  • Shelves: 2pcs, optional 2pcs ,adjustable
  • Work zone Material: 304 stainless steel, 1.0mm thick
AIP71-O253

UV Sterilization Cabinet

  • Type: With Ozone
  • UV Ray Wavelength: 253.7/184.9nm
  • Sterilization Way: 2 sides of UV ray+1 side of Ozone
  • Capacity: 200 L
AIP71-W253

UV Sterilization Cabinet

  • Type: Without Ozone
  • UV Ray Wavelength: 253.7nm
  • Sterilization Way: 3 sides of UV ray
  • Capacity: 200 L
ANA61-05A

Electrolyte Analyzer

  • Type: Automatic
  • Test Items: K, Na, Cl, Ca, pH
  • Test Method: ISE Direct Method
  • Test Time: ≤60S
ANA61-06A

Electrolyte Analyzer

  • Type: Automatic
  • Test Items: K, Na, Cl, Ca, pH, TCO2
  • Test Method: ISE Direct Method
  • Test Time: ≤60S
ANA61-03SA

Electrolyte Analyzer

  • Type: Semi-automatic
  • Test Items: K, Na, Cl
  • Test Method: ISE Direct Method
  • Test Time: ≤60S
ANA61-05SA

Electrolyte Analyzer

  • Type: Semi-automatic
  • Test Items: K, Na, Cl, Ca, pH
  • Test Method: ISE Direct Method
  • Test Time: ≤60S
ANA57-37SP

Auto Chemistry Analyzer

  • Overall Performance: Throughput: 200 Tests/hour
  • Overall Performance: Analysis Method: End-point, Fixed-time, Rate(Kinetic)
  • Overall Performance: Certificates: CE, FDA, ISO9001, IS013485
  • Sample & Reagent System: Sample Positions: 37 sample positions
ANA57-49SP

Auto Chemistry Analyzer

  • Overall Performance: Throughput: 200 Tests/hour
  • Overall Performance: Analysis Method: End-point, Fixed-time, Rate(Kinetic)
  • Overall Performance: Certificates: CE, FDA, ISO9001, IS013485
  • Sample & Reagent System: Sample Positions: 49 sample positions
ANA57-60SP

Auto Chemistry Analyzer

  • Overall Performance: Throughput: 400 Tests/hour
  • Overall Performance: Analysis Method: End-point, Fixed-time, Rate(Kinetic)
  • Overall Performance: Certificates: CE, FDA, ISO9001, IS013485
  • Sample & Reagent System: Sample Positions: 60 or 90 sample positions, built-in barcode system available
ANA57-90SP

Auto Chemistry Analyzer

  • Overall Performance: Throughput: 600 Tests/hour
  • Overall Performance: Analysis Method: End-point, Fixed-time, Rate(Kinetic)
  • Overall Performance: Certificates: CE, FDA, ISO9001, IS013485
  • Sample & Reagent System: Sample Positions: 90 sample positions, built-in barcode system available
ANA57-150SP

Auto Chemistry Analyzer

  • Overall Performance: Throughput: 800 Tests/hour, 1200Tests/hour with ISE(Optional)
  • Overall Performance: Analysis Method: End-point, Fixed-time, Rate(Kinetic)
  • Overall Performance: Certificates: CE, FDA, ISO9001, IS013485
  • Sample & Reagent System: Sample Positions: 150 sample positions
ANA60-10IP

Fluorescence Immunoassay Analyzer

  • Excitation Light Source: LED
  • Wavelength: Excitation Wavelength λo = 365 nm Detection Wavelength- λ₁ = 615 nm
  • Detection Channel: 1
  • Incubation Position: 10
ANA62-80

Automatic ESR Analyzer

  • Measurement Method: Infrared detection
  • Analysis Result: Westergren ESR value (mm/hour)
  • Throughput: Maximum 80 tests/hour
  • Analysis Channels: 40 (load up to 40 samples for analysis at the same time)
BAC81-200

Water Bath

  • Capacity: 10 L
  • Temp. Control Range: R.T.+5°C ~100°C
  • Temp.Stability(100°C): ±0.5°C
  • Time Range: 1m~99h59m OFF is forever
BAC81-700

Water Bath

  • Time Range: 1~99h59min (0 is forever)
  • Temperature Range: RT.+5°C~100°C
  • Temp. accuracy: ±0.5°C
  • Temp. Uniformity@37°C: ±0.5°C
BAC81-300

Water Bath

  • Time Range: 1~99h59min (0 is forever)
  • Temperature Range: RT.+5°C~100°C
  • Temp. accuracy: ±0.5°C
  • Temp. Uniformity@37°C: ±0.5°C
BAC81-600

Water Bath

  • Time Range: 1~99h59min (0 is forever)
  • Temperature Range: RT.+5°C~100°C
  • Temp. accuracy: ±0.5°C
  • Temp. Uniformity@37°C: ±0.5°C
BAC81-900

Water Bath

  • Time Range: 1~99h59min (0 is forever)
  • Temperature Range: RT.+5°C~100°C
  • Temp. accuracy: ±0.5°C
  • Temp. Uniformity@37°C: ±0.5°C
BAC34-110HC

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: Heating: Room temp.-110°C Cooling: Room temp.~below room temp. 25°C
  • Temperature Uniformity: Max. ±0.5°C(@20°C-25°C)
  • Outer Dimension (WxDxH): 200Wx235Dx120H mm
  • Weight: 7.3 kg
BAC1A-02

Micro-plate Incubator

  • Temp. Control Range: R.T.+5°C ~70°C
  • Temp. Setting Range: 5°C ~70°C
  • Temp. Stability@37°C: ±0.2°C
  • Platform Temp. Uniformity: ±0.5°C
BAC1A-04

Micro-plate Incubator

  • Temp. Control Range: R.T.+5°C ~70°C
  • Temp. Setting Range: 5°C ~70°C
  • Temp. Stability@37°C: ±0.2°C
  • Platform Temp. Uniformity: ±0.5°C
BAC31-100RT

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: R.T.+5 °C~105 °C
  • Temp. Setting Range: 5°C~105°C
  • Temperature Stability@100°C: ±0.5°C
  • Temperature Stability@40°C: 0.3 °C
BAC32-100HC

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: Heating: R.T.+5°C~105°C and Cooling: -10°C~105°C
  • Temp. Setting Range: Heating:5 °C ~105 °C, Cooling:-10 °C ~105 °C
  • Temperature Max. Decrease: Cooling: R.T. decreases @R.T. 26°C
  • Temperature Stability@100°C: ±0.5 °C
BAC35-100

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: 0-100 °C
  • Temp. Setting Range: ±0.5 °C
  • Weight: 1.4 kg
  • Temperature Precision: ±0.5°C
BAC36-100

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: 0-100 °C
  • Temperature Uniformity: ±0.5 °C
  • Weight: 1.4 kg
  • Temperature Precision: ±0.5°C
BAC33-100C

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: -10°C~105°C
  • Temp. Setting Range: -10°C~105°C
  • Temperature Max. Decrease: R.T. decreases 25°C@R.T. 26°C
  • Temperature Stability@100°C: ±0.5°C
BAC36-100PS

Dual Temperature Control Dry Bath Incubator

  • Temperature Range: 0-100°C Programmable 3 segments
  • Outer Dimension (WxDxH): 185x185x90 mm
  • Weight: 1.4 kg
  • Temperature Precision: ±0.5°C
BAC44-100RT

Dual Temperature Control Dry Bath

  • Temperature Range: 4-100°C
  • Temperature Uniformity: ±0.5°C
  • Outer Dimension (WxDxH): 130x130x85 mm
  • Weight: 0.75 kg
BAC028-05

Water Bath

  • Capacity: 5 L
  • Power requirements: AC 220 V 50 HZ
  • Power: 500 W
  • Temperature Range: RT+5 - 100°C
BAC028-12

Water Bath

  • Capacity: 12 L
  • Power requirements: AC 220 V 50 HZ
  • Power: 800 W
  • Temperature Range: RT+5 - 100°C
BAC028-22A

Water Bath

  • Capacity: 22 L
  • Power requirements: AC 220 V 50 HZ
  • Power: 1000 W
  • Temperature Range: RT+5 - 100°C
BAC028-22B

Water Bath

  • Capacity: 22 L
  • Power requirements: AC 220 V 50 HZ
  • Power: 1000 W
  • Temperature Range: RT+5 - 80°C
BAC031-33

Shaking Water Bath

  • Capacity: 33 L
  • Temperature range: RT+5 - 99°C
  • Display resolution: 0.1°C
  • Temperature uniformity (at 37°C): ±1.0°C
BAC031-47

Shaking Water Bath

  • Capacity: 47 L
  • Temperature range: RT+5 - 99°C
  • Display resolution: 0.1°C
  • Temperature uniformity (at 37°C): ±1.0°C
BAC034-33A

Shaking Water Bath

  • Capacity: 33 L
  • Temperature range: RT+5-100°C
  • Display Resolution: 0.1°C
  • Temperature Uniformity: ±1°C
BAC034-33B

Shaking Water Bath

  • Capacity: 33 L
  • Temperature range: RT+5-100°C
  • Display Resolution: 0.1°C
  • Temperature Uniformity: ±1°C
BAC034-47A

Shaking Water Bath

  • Capacity: 47 L
  • Temperature range: RT+5-100°C
  • Display Resolution: 0.1°C
  • Temperature Uniformity: ±1°C